Publicidad
Idiomas disponibles
Idiomas disponibles
■
Signal receiving unit
The signal receiving unit is attached to the indoor unit.
1
4
5
1
Temporary operation button
(See page 14)
2
Signal receiving part
The signal sent from the remote controller is
received.
3
Display lamp
One of displays flashed while a trouble occurs.
When the display lamp flashes, refer to "Before
asking for repair work"
4
lamp (Green)
This lamp goes on during operation.
5
lamp (Green)
This lamp goes on while the timer is reserved.
6
lamp (Orange)
This lamp flashes while a trouble occurs.
3
Disagreement in operation mode
If "pi, pi" sound is heard, the display lamp
●
goes on, and the
alternately, the operation is not performed with
the desired mode.
Even if you push START/STOP, MODE,
●
TEMPERATURE buttons when remote controller
operation is disabled by the central control or
other means, "pi" is heard 5 times and the button
operation is not accepted.
– 6 –
CAUTION
lamp and
2
6
lamp flash
EN
6-EN
Publicidad
