Publicidad
Idiomas disponibles
Idiomas disponibles
Failed to Connect to WiFi During Initial Setup Process
If the camera fails to connect to WiFi, please try the following solutions:
• Ensure that you have entered the correct WiFi password.
• Put the camera closer to your router to ensure a strong WiFi signal.
• Change the encryption method of the WiFi network to
WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
• Change your WiFi SSID or password and make sure that SSID is within
31 characters and password is within 64 characters.
• Set your password using only the characters available on the keyboard.
If the problem is not solved, please contact Reolink Support.
Picture Is Not Clear
If the picture from the camera is not clear, please try the following
solutions:
• Check the camera dome cover for dirt, dust or spiderwebs. Please clean
the dome cover with a soft, clean cloth.
• Point the camera to a well-lit area. The lighting condition will affect the
picture quality a lot.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check it again.
If the problem is not solved, please contact Reolink Support.
15
English
Specification
Hardware Features
Infrared Night Vision: Up to 15 Meters
Day/Night Mode: Auto Switchover
Field of View: Horizontal 96°-38°; Vertical: 55°-21°
General
Dimension: 228*147*129mm
Weight (Battery included): 1.4KG
Operating Temperature: -10°C~+55°C (14°F~131°F)
Operating Humidity: 20%~85%
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
English
16
Publicidad
