ARVA EVOBT Guía De Utilización página 12

3.2.3/ STEP 3: FINE SEARCH
When the screen indicates that you are 3 meters from the
burial(s) (or 5 m depending on the parameter adjustment),
your device will no longer indicate a direction. At this point
you need to conduct a fine search using a cross pattern.
Move your device in a cross pattern to locate the point where
the distance reading is the lowest.
12
Marking function: When you are less than
3 meters from the burial(s) (or 5 m de-
pending on the parameter adjustment),
the MARKING pictogram blinks in the
upper right-hand corner of the screen.
Press the marking button to mark the
victim. The device will start searching for
the next victim without any previously
marked burial(s) interfering. When you
mark a victim, a flag appears next to that victim's pictogram.
If "no" is displayed, marking
a victim is impossible. This
is due to one of the following
reasons:
-The victim is not synchro-
nised yet.
-The victim you are trying to
mark is more than 3m away.
-The victim's transceiver is emitting outside the
regulatory transmission band.
EN