Merach MR-R14 Manual Del Usuario página 18

Instruction of Monitor
BUTTONS
1. MODE
Press this button to changeover display time time,
calories, total strokes, distance and total diastance(ODO).
2. SET
In setting status, press this button and changeover
choose the "MODE" button to increase setting value in
relevant flashing window for TIME, DIST and CAL.
3. RESET
In setting status, press this button to reset the value in
relevant flashing window for TIME, DIST and CAL.
In monitor status, hold this button for 3 seconds to reset
all values to zero.
FUNCTIONS
1. STROKES
Display instantaneous strokes and the range is 0~9999 Strokes.
2. SPM(strokes/ minute)
Display current repetition per minute(SPM) during exercise. It reflects the stroke
frequency. The range is 0~1500 rate per minute
3. TIME
(1)Count the total time from exercise start to the end and the range is 0:00 ~
99:59Minute
(2)Exercise time can be set in advance, when it approaches the preset time, the
monitor will alarm for 10 seconds. The maximum pre-set time is 99 minutes.
4. TIME(500m)
Show to paddle boat time with 500M, The range is 0:00 ~ 99:59Minute
5. DISTANCE(DIST)
(1)Count the total distance from exercise start to the end and the range is 0.0 ~
EN
9999KM or Mile.
(2)Exercise distance can be set in advance, when it approaches the preset distance,
the monitor will alarm 10 seconds. The maximum pre-set distance is 9999KM or Mile.
6. TOTAL DISTANCE(ODO)
Count the total distance after installing the batteries.
7. TOTAL STROKES
Count the total strokes after installing the batteries.
015