Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary for safe and
effective operation of this product. This product has unique features and, even if you are familiar
with similar products, it is necessary to read this manual carefully to ensure you fully understand the
instructions. Ensure all users of the tool read and fully understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Be aware of kickback!
Warning: Sharp blades or teeth!
Indoor use only!
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries.Pozor!
Caution!
Toxic fumes or gases!
DO NOT touch! DO NOT access the guard without removing the power. Keep children and
bystanders away while operating a power tool. Distractions can cause you to lose control.
All visitors should be kept safe distance from work area.
Always disconnect from the power supply when adjusting, changing accessories, cleaning,
carrying out maintenance and when not in use!
Technical Abbreviations Key
V
~, AC
A, mA
n0
Ø
°
Hz
DC
W, kW
EN
/min or min-1
dB(A)
m/s2
2
Original Instructions
Volts
Alternating current
Ampere, milli-Amp
No load speed
Diameter
Degrees
Hertz
Direct current
Watt, kilowatt
Operations per minute
Decibel sound level (A weighted)
Metres per second squared (vibration
magnitude)
Specification
Part no:
Compatible routers:
Router module size:
Workcentre table size:
Extruded fence size:
Extruded fence thickness:
MDF fence face size (x 2):
Max MDF fence face opening:
Fence adjustable position:
Fence micro adjusters:
Spacer bar settings:
Guard height:
Featherboard height:
Maximum throat plate router bit
diameter (Dmax):
Large –
Medium -
Small -
Dust Extraction fitting (Dia):
Net weight:
Note: Imperial measurements are approximate.
General Safety
WARNING: When using electric power tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury including the following safety
information. Read all these instructions before attempting to operate this product and save these
instructions for future use.
WARNING: This appliance is not intended for use by persons (including children) with reduced,
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1
Keep work area clear - Cluttered areas and benches invite injuries
2
Consider work area environment
- Do not expose tools to rain
- Do not use tools in damp or wet locations
- Keep work area well lit
- Do not use tools in the presence of flammable liquids or gases
3
Guard against electric shock - Avoid body contact with earthed or grounded surfaces (e.g.
pipes, radiators, ranges, refrigerators)
4
Keep other persons away - Do not let persons, especially children, not involved in the work
touch the tool or the extension cord and keep them away from the work area
5
Store idle tools - When not in use, tools should be stored in a dry locked-up place, out of reach
of children
6
Do not force the tool - It will perform the job better and safer at the rate for which it was
intended
Use the right tool - Do not force small tools to do the job of a heavy duty tool
7
- Do not use tools for purposes not intended; for example, do not use circular saws to cut tree
limbs or logs
8
Dress appropriately
- Do not wear loose clothing or jewellery, which can be caught in moving parts
- Suitable safety footwear is recommended when working outdoors
- Wear protective covering to contain long hair
TWX7RT001
Triton TRA001
Triton MOF001
Triton JOF001
Triton TRA002
Triton TFBR001
660 x 410mm / 26" x 16-1/8"
904 x 708mm / 35-9/16" x 28"
680 x 85mm / 26-3/4" x 3-3/8"
21.4mm / 7/8"
340 x 75mm / 13-3/8 x 3"
90mm / 3-1/2"
+25 / -125mm / +1" / -5"
1mm / 3/64" (one full revolution)
0.5, 1.0, 1.5, 2.0mm
1/64", 3/64", 1/16", 5/64"
0-76mm / 0-3"
9.5mm / 3/8"
50mm / 2"
40mm / 1-9/16"
20mm / 13/16"
31.75mm / 1-1/4" (High Pressure),
62.5mm / 2-1/2" (Low Pressure)
9.9kg / 22lbs