Publicidad
Idiomas disponibles
Idiomas disponibles
This equipment is transported without gasoline or oil in the engine. Fill the engine with
gasoline and oil according to the instructions in this manual, before using the lawn mower.
Lower arm assembly
To fix the lower arm, you must use the 2 knobs and screws that come with the product. Initially,
position the arm (1) in such a way that it has flat faces outside the arm support. To make things easier,
position the quick adjustment pins "A" on the arm in the tilt adjustment holes on the support [Fig. 01].
Then pass the screw (2) through the hole, fit the washer (3) [Fig. 02], and finally screw in the knob (4)
[Fig. 03].
Repeat the process on the other side and final tighten the knobs (4) [Fig. 03].
A
Fig. 01
Upper arm assembly
Align the holes on the upper arm with the holes on the lower arm.
Insert the quick release handle (5) into the holes, placing the handle on the outside of the arm [Fig. 04].
Use the two washers (6) and then tighten the set with the knob (4) [Fig. 04].
Firm the arms by closing the quick release handle (5) towards the tube [Fig. 05].
Once the arms are in place, release the engine brake by activating the braking lever (7), pull the engine
activation cord (8) and connect it to the arm hook (9) [Fig. 06].
5
6
Fig. 04
ASSEMBLY AND USE
1
4
2
3
Fig. 02
5
Fig. 05
4
Fig. 03
7
9
8
Fig. 06
EN
21
Publicidad
