EN
1 - Cover of the fuel tank.
2 - Measuring rod for the oil level.
2
141 cc engine
Oil
The engine is supplied without lubricating oil. Remove the dipstick and fill with 500 ml of 10W30
Synthetic oil. The first oil change must be done after 5 hours of use. Subsequent changes must be made
every 25 hours of work or 6 months, whichever comes first.
The absence of oil, insufficient oil, excess oil or oil other than that recommended will cause
damage to the engine and does not constitute a warranty.
Gasoline
Always use good quality gasoline and do not store it for more than 30 days, as it affects the engine's
working condition.
The tank has a capacity of 850 ml for the 141 cc engine, and 1.3 L for the 159 cc and 196 cc engines.
Allow the engine to cool for at least two minutes before refilling with gasoline to avoid explosions. Do
not leave gasoline in the tank. Use the mower until you run out of gasoline to prevent it from building
up in the carburetor. Do not mix oil with gasoline.
Switching
1. Engines equipped with fuel injector "Primer", press 3 times before starting.
2. Activate the braking lever (7) [Fig. 13].
3. Pull the engine drive cord (8) until strength is met and then pull firmly [Fig. 13].
4. The work is carried out by keeping the braking lever pressed to the arm (7) [Fig. 14].
5. To turn off the equipment, simply release the braking lever, the engine stops instantly (7) [Fig. 15].
8
7
Fig. 13
24
FORM OF USAGE
1
4
2
3
3 - Air filter.
4 - Fuel injection button (primer).
1
3
4
159 cc engine
7
Fig. 14
1
2
196 cc engine
7
Fig. 15
3
4