Publicidad
Idiomas disponibles
Idiomas disponibles
EN
7. The charging status can be viewed through the charger's LED indicator (red light charging, green light end of charging).
3.5 Attention (residual risks):
Use the tool carefully in order to avoid the following risks:
1. Cuts and wounds caused by sharp edges.
2. Use for long periods of time or in the wrong positions can cause damage.
Warning!
The device can produce electromagnetic waves and interfere with electromedical devices. It is recommended to
consult a doctor before using this tool with electro-medical devices.
Warning!
Do not touch the chain when the battery is on the tool.
Keep a minimum distance of 15cm between the chain and any part of the body.
Keep passers-by and other people at a minimum distance of 1.5m.
Warning!
In particular situations, the chain and the handle could reach high temperatures. It is recommended to handle the
tool with care using protective gloves.
Noise and vibration measurements:
Sound pressure level: < 70 dB (A)
Max vibration during use: < 2,5 m/s
3.6 Tool safety requirements:
The chainsaw is safe if it meets the following requirements:
1. Chain is undamaged and in optimal lubrication and sharpening condition.
2. The chain tension is correct.
3. The bar is not deformed or damaged.
4. The bar groove is in good condition.
5. The chainsaw is clean and dry.
6. The handle and the second handle are in good condition.
7. Safety switch and trigger operate normally.
8. The control circuit works normally and has not been modified.
9. Lubrication works normally.
10. The depth of the toothed groove between the wheel and chain does not exceed 0.5 mm.
11. Bar and chain are assembled correctly as specified in this manual.
12. All accessories used are compatible and original.
13. The oil cap closes properly.
2
8
Publicidad
