Publicidad
Idiomas disponibles
Idiomas disponibles
EN
14. waste disposal and environmental protection
Remove the battery from the tool; dispose the battery, the tool, the accessories and the packaging according to the type of
material.
Do not dispose the tool with household waste
Take the tool to a waste collection center.
Metal and plastic parts can be recycled.
For more detailed information contact the service center.
Do not dispose the battery in household waste, do not burn, do not immerse in water. In case of gas or liquid
leakage, the battery can cause damage to the environment and health.
Before disposing the battery, discharge it completely. It is recommended to cover the poles with adhesive tape to prevent short
circuits. Do not disassemble the battery.
Dispose the batteries in accordance with local regulations. The battery must be taken to a waste collection center and disposed
in an environmental- friendly way. For detailed information consult your local waste disposal offices or our service center.
Dispose the pruned branches in the designated bins. Do not dispose them with household waste.
15. TROUBLESHOOTING
Make sure that the tool is repaired only by qualified people from our service centers, using only original parts as spare parts.
This will ensure the life and the safety of the tool.
Problem
The chainsaw does not work
Intermittent operation
Heated chain
Bad cutting surface
La batería no carga. La luz
roja del cargador parpadea.
Possible cause
Low battery.
Battery disconnected.
Switch malfunction.
Loose internal connections.
Switch malfunction.
Damaged chain.
Poor lubrication.
Damaged bar.
There is no lubrication, resulting in excessive
friction
Badly sharpened or damaged chain.
Poor cut and with bad quality.
The battery is not fully charged.
The battery is not inserted correctly in the battery
charger connector.
The charger is not properly connected to the
power socket.
Dirty battery poles.
Damaged battery.
Damaged battery charger.
Charge the battery.
Connect the battery.
Send to the service center.
Send to the service center.
Replace the chain.
Check the lubrication system.
Replace the bar.
Check the lubrication system.
Replace the chain.
Read carefully the user's manual.
Charge the battery.
Insert the connector correctly.
Connect it properly.
Clean the poles.
Replace the battery.
Replace the battery charger.
18
Solution
Publicidad
