Publicidad
Idiomas disponibles
Idiomas disponibles
EN
9. assembly and initial start-up
The chainsaw is ready for use, before inserting the battery check the following points:
1. Check that the chainsaw and batteries are clean and dry.
2. Assemble left hand handle..
3. Check the chain tension, make sure it is not too slow and tight for the job.
4. Fill the oil reservoir as specified in section.
5. Check that the two locking nuts are screwed properly.
6. Check that the spring of the chain cover works properly.
7. Insert the battery into the special location of the chainsaw until it clicks, checking that it is locked.
12
Publicidad
