Publicidad
Idiomas disponibles
Idiomas disponibles
EN
10. initial working procedure
Wear suitable gloves and clothing before using this tool. Check the tool before working and verify the correct ope-
ration of the switch. The chain must stop when the trigger is released. Do not use the chainsaw if the switch fails.
Check that the battery voltage matches the tool voltage.
The electric motor stops when the trigger is released, but the chain will continue moving by inertia for a few seconds.
Do not touch the chain while it is moving to avoid the risk of cuts or injuries.
1. Hold the saw firmly with both hands.
2. Make sure that the chain and bar are not in contact with any object.
3. Press the safety button with your thumb to unlock the trigger.
4. Press the trigger all the way down, the machine starts.
5. Do not exceed the cutting dimensions to protect the saw and battery from possible damages.
6. Do not cut branches larger than those indicated in the technical specifications.
7. Release the trigger if the chain is blocked, the engine stops.
11. cutting procedure
Use protective glasses
Use appropriate clothing, use protective
shoes with non-slip soles
Warning!
In particular situations, the chain and handle could reach high temperatures. It is recommended to handle the chain-
saw with care using protective gloves.
Warning!
If the branch to be cut is under tension, the bar could get stuck and the user will lose control of the saw, resulting in
serious injury. Therefore, first of all make a lightening cut (1) on the pressure side (A), then a crosscutting cut (2) on the pulling
side (B).
Use protective gloves
Danger of cutting and serious injury.
13
Publicidad
