Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1. Always keep the chainsaw at full speed.
2. Do not cut using the end of the bar.
3. Keep the bar in the correct and safe position.
4. Constantly check that the lubrication is working correctly .
5. While moving the chainsaw from one branch to another, release the trigger to stop the chain.
6. While using the tool, keep every other part of the body at a minimum distance of 15 cm from the chain.
7. Keep bystanders and others at a minimum distance of 1.5 m.
8. Do not use the tool in the rain or in humid environments.
9. After use, remove the battery from the chainsaw.
10. If left unused for 10 minutes, the chainsaw switches off automatically.
Warning!
In case of difficult cut, check the battery charge and the correct sharpening and tension of the chain.
12. CLEANING AND MAINTENANCE
Tools to be repaired should be brought to the
service center. The use of original parts will en-
sure the correct and safe operation of the tool.
Disconnect the battery from the tool before
checking, doing maintainance, repairing or cle-
aning the tool to avoid the danger of accidental
tool activation.
Before any maintenance or cleaning operations, remove the battery from the chainsaw. Accidental starting can cause serious
injury. Frequent checks of the tool will make it safe and reliable.
1. Do not spray the tool with water and do not immerse it, it may cause a short circuit inside the tool.
2. Keep the handle and any motor ventilation devices clean, use a cloth to clean the tool. Do not use aggressive products to clean
the tool to avoid damaging surfaces.
3. Clean the body of the chainsaw with a damp cloth.
4. Remove the protective pinion cover.
5. Clean the area around the pinion and the body with a damp cloth.
6. Clean the bar and chain.
Wear protective gloves before handling the
blade.
Warning!
In particular situations, the chain and handle
could reach high temperatures. It is recom-
mended to handle the chainsaw with care using
protective gloves.
14
Publicidad
