Publicidad
Idiomas disponibles
Idiomas disponibles
EN INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON
PURCHASING YOUR PRODUCT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the packaging
carefully in case questions arise in the future. Please always include these
instructions when handing on the product to a third party. This product must
be assembled by an adult. This product is designed for private / domestic use
only. This product is not designed for commercial / industrial use. The use of
the product requires certain capabilities and skills. Always adjust according
to the age of the user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Soccer Goal Advanced 120
Item number:
76952
Dimensions when assembled: 120 x 80 x 60 cm
Purpose:
Stable training goal for versatile throwing,
shooting and goalkeeper training.
If you have assembly problems or would like further information on the prod-
uct, we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Soccer goal with 4 pegs for fixation (see parts list on page 2) | 1 x Allen
key | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not
required for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months. Long cord. Stran-
gulation hazard.
• WARNING! Do not climb on the goal frame or net or hang from the goal
posts. There is a serious risk of injury!
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connections for stability and fit. Any sharp edges that might have formed
must immediately be removed!
• Children should only use the product when they are under adult supervi-
sion.
• No liability is assumed for damages resulting from incorrect application of
the instruction manual.
ASSEMBLY INSTRUCTIONS
Notice: The product must be assembled by 2 adults. Lubricate the connec-
tion assemblies on the narrow ends a bit before starting the assembly. That
facilitates the assembly and extends the durability of the product!
1. Assembling the goalpost frame (Fig. 1 – 4)
Mount the goal frame as shown in figures 1 – 4. Be sure to use the appropri-
ately numbered tubes. The frame tubes of the main frame 1 – 3 (posts and
crossbar) have a diameter of 75 mm and are first inserted into each other and
then screwed. Use for each one screw (11) with washer (12) as shown. The
tubes of the rear goal frame (tubes with 32 mm diameter) are connected via
click connections. Make sure that the bars engage audibly. Please also pay
attention to the information on size ratios and lengths in Fig. 3.
All images are examples of the design.
2. Fitting the goal net (Fig. 5 – 6)
Pull the goal net (13) over the rear part of the frame to hook it into the hooks
on the back of the posts (2 and 3) and crossbar (1). To do this, start with
the lowest mesh of the goal net on the lowest hook of one of the posts. Then
hook the other meshes onto the back of the post and batten in turn, skipping
one mesh at a time. When hooking in, the respective mesh is pulled twice
over the matching hook as shown in the detailed illustrations A – D in Fig. 5.
Then pull the net taut backwards and downwards and secure it with the hook-
and-loop straps (9) and the line (10) as shown in Fig. 6. Also close the hook-
and-loop fasteners sewn to the edge of the goal net, as shown in the detailed
illustration E, around poles 4, 5 and 6. Finally, attach the HUDORA logo (15)
to the inside of the goal net (13) as shown in the detailed illustration F.
3. Stand locking of the goal
Finally fix the goal frame by means of the pegs (14) on the ground. Ascertain
that the ground is suitable for the application of pegs (e.g. no water pipes for
sprinkler devices!). Make sure that the pegs are completely driven into the
ground and have firm position. Avoid protruding fastenings (risk of stum-
bling). On too hard grounds the goal must be saved by appropriate measures
in another way against overturning in order to prevent risk of injuries (e.g.
with slabs or sandbags). Never play with an unsecured goal or never leave
the goal unsecured respectively.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions.
Keep it in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing
together the metal parts could lead to the protective layer being scratched
and rust developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special clean-
ing agents! Check the product for damage or traces of wear and tear before
and after each use. Do not make any structural changes. For your own safety,
please use original spare parts only. These can be sourced from HUDORA.
If parts become damaged or if sharp edges or corners should develop, the
product may not be used any more. If in any doubt, please contact our service
team (http://www.hudora.de/). Store the product in a safe place where it is
protected from the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collec-
tion point provided in your area. Local waste management companies will be
able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however,
we put just as much effort into rectifying them. You can find numerous in-
formation on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/.
9/16
Publicidad
