Descargar Imprimir esta página

Baxi SILA RCT MINI PLUS Instrucciones De Instalación, Funcionamiento Y Mantenimiento página 63

Unidad de recuperación de calor residencial

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
Description
"SILA RCT MINI PLUS" is 3-speed (Min, Max, Holiday) residential heat recovery unit + mechanical bypass +
humidity sensor. The unit is designed to continuously remove stale air from rooms by means of a system of
fixed piping and grilles. The heat is recovered from the air suctioned from the room by means of a high-
performance heat exchanger, which transfers is to the incoming cool air. The flow rate of the ventilation can
increase up to "Max" mode, for example if there is a high amount of humidity in the room. The extracted air is
discharged outside by means of a single duct to a grille.
The frame is made of galvanized painted steel. The internal sides of the housing are made in expanded
polypropylene.
The heat recovery unit is also equipped with a filter maintenance warning system. (for more information see
the paragraph on FILTER CLEANING).
Safety
Warning:
!
this symbol indicates that care must be taken to
avoid injury to the user
• Follow safety instructions to prevent damaging the user.
• Do not use the device for any function other than that specified in this booklet.
• After removing the product from its packaging, ensure that it is not damaged. If in doubt please contact a
professionally qualified person or authorised BAXI Technical Assistance Centre.
• Never leave packaging parts within reach of children or disabled persons.
• The use of any electric device requires compliance with a few fundamental rules, including:
Never touch it with wet or humid hands. Never touch it when barefoot.
• Do not use the unit in the presence of flammable substances or vapours such as alcohol, insecticides,
gasoline, etc.
• Store the device away from children and persons with disabilities when you decide to disconnect it from the
power supply and not to use it any more.
• Do not make changes of any kind to the unit.
• Maintenance instructions must be followed to prevent damage to and/or excessive wear of the device.
• Do not leave the device exposed to adverse weather conditions (rain, sun, etc.)
• Do not rest objects on the device.
• Periodically check device conditions. If imperfections are noted, do not use the unit and immediately contact
an authorised BAXI Technical Assistance Centre.
• Promptly contact an authorised BAXI Technical Assistance Centre in the event of unit malfunction and/or
failure and request the use of original BAXI spare parts for any repairs.
• If the product falls or receives a strong blow, immediately have it inspected at an authorised BAXI Technical
Assistance Centre.
• The device must be installed so as to ensure that no one can come near its moving or live parts during normal
operating conditions.
• In the event of: device dismantling, using appropriate tools, heat exchanger removal, motor module removal:
the device must already be switched off and disconnected from the electrical mains.
• Switch off the main switch on the system when: a malfunction is detected, you decide to perform external
cleaning maintenance, you decide not to use the device for short or long periods.
• The device cannot be used as an activator for water heaters, stoves, etc. nor should it discharge into the hot
air ducts of said devices.
63

Publicidad

loading