Publicidad
6.
Error W1: Battery abnormal. Please consult
the instructions or APP.
Error W2: Wheel module abnormal. Please
consult the instructions or APP.
Error W3: Side brush module abnormal.
Please consult the instructions or APP.
Error W4: Rolling brush abnormal. Please
consult the instructions or APP.
*Error W5: Water pump abnormal. Please
consult the instructions or APP.
Error W6: Laser sensor abnormal. Please
consult the instructions or APP.
Error W7: Fan abnormal. Please consult the
instructions or APP.
Please open the battery compartment, check whether the battery is properly
connected, and try to restart the robot. The battery temperature is too high or too
low. Please wait for the battery temperature to be normal (0 ° ~40 ° /32 °F~104
Please check whether any foreign matter is stuck in a wheel and try to restart the
robot. If the error persists, please contact our Service Department.
Please check whether any foreign matter is stuck in a side brush and try to restart
the robot. If the error persists, please contact our Service Department.
Please remove and clean it, its connections, its cover and the suction inlet. Please
try to restart the robot after cleaning. If the error persists, please contact our
Service Department.
Please clean the water tank, water pump connections on the tank and water
pump connections on the robot, the water outlet at the robot bottom, and check
the mop module. Please try to restart the robot with all modules installed back
after cleaning. If the error persists, please contact our Service Department.
Please check the laser sensor for foreign matter and try to restart the robot after
cleaning. If the error persists, please contact our Service Department.
Please check whether any foreign matter is stuck in the fan and try to restart the
robot. Please clean the dust box and filters and try to restart the robot. If the error
persists, please contact our Service Department.
72
Publicidad
