Technical Data - ADURO H1 Manual De Usuario

•
Accumulated and unburned pellets in the burner cave after each "failed start-up" must be removed
before lighting again. Check that the cave is clean and positioned properly before lighting again.
•
We recommend that a smoke detector be set up in the room where the Hybrid stove is installed
Aduro A/S declines all responsibility for any damage which may be caused, directly or indirectly, to persons,
animals or objects as a consequence of non-compliance with any provision specified in the manual,
especially warnings regarding installation, use and maintenance of the appliance.
The responsibility for improper use of the product is entirely borne by the user, and relieves the manufacturer
from any civil and criminal liability. Tampering or unauthorized replacement with non-original spare parts
could be hazardous for the operator's safety and relieves the company from any civil and criminal liability.

1.3 Technical data

Aduro H1
Nominal power
Heats
Flue outlet
Fresh air supply
Measurements (HxBxD)
Height exhaust branch above floor level
Distance from centre of exhaust branch to rear
edge of fireplace
Weight
Material
Fuel
Max wood lenght
Convection stove
Primary-, secondary- and tertiary air supply
Air-wash system
Ashpan
Ceramic igniter
Energy efficiency
Energy efficiency index
Energy efficiency class
Chimney draught
Maximum combustion amount per hour:
- Wood
- Screw conveyor performance – pellets per hour
Heat rating in buildings with
- Optimum insulation
- Average insulation
- Inadequate insulation
Electrical connection
Pellet container capacity
Data
7,0 kW wood / 6,8 kW pellets
2
20-140 m / 2-9 kW. Wood 3-9 kW / Pellets 2-7
kW
Ø150 mm top/rear
Ø78 mm external
120 x 50 x 50,8 cm
117 cm
25 cm
135 kg
Steel
Wood, woodbriquettes and pellets Ø6 mm, max
lenght 40 mm. Pellets in ENplus A1 quality.
39 cm
81% wood/ 87% pellets
119,6
A+
12 Pa
Approx 3.1 kg
Approx. 1.5 kg
150 m 2
2
100 m
2
60 m
230V / 50Hz
Approx. 15 kg
48