ADURO H1 Manual De Usuario página 64

Pakninger
Med tiden bliver pakningerne slidte og bør derfor efterses. Er de utætte, bør de skiftes.
All maintenance and cleaning of the Aduro H1 should be carried out when it is
cold.
6.1 Daily maintenance – when using pellets
When you add pellets, you should brush the "burn cave" clear of ashes and cinders. Wait until the stove is
cold. Open the door to the combustion chamber and lift the front of the "burn cave" (the black cast iron cone
with the Aduro logo). Brush the ashes and the cinders into the grate towards the ash pan. Avoid brushing
ashes and cinders down into the pellet snail. Put back the front of the "burn cave."
Empty the ash pan when needed.
6.2 Regularly – when needed
Ashes
Empty the ash pan before it gets completely full. Always leave a layer of ashes in the stove because it
insulates and makes it easier to light a fire.
Remove the burner cavity and clean the top screw conveyor for ashes with a vacuum cleaner. This is done
easiest by making a "paper ring" of paper roll, which is laid around the opening of the snail. Then press the
vacuum cleaner muzzle down towards the "paper ring" so it fits tightly. After this, the ashes can be
vacuumed up.
Glass
If the wood you burn is too moist, you will get soot stains on the glass pane. They can be easily removed
using a damp cloth that you dip in cold ash and rub on the sooty glass. Special cleaning agents are also
available to remove soot from glass, i.e. the Aduro Easy Clean pad.
Pellet box
Burn all pellets and brush the box clean.
6.3 Periodically maintenance – after about 500 hours of use
If the stove is placed in dusty surroundings, it can be necessary to clean the ventilator.
6.4 Yearly maintenance
To be carried out when the pellet container has been emptied for wood pellets.
Burn all pellets. Disconnect the power to the stove and wait until it's cold.
6. Maintenance of the stove
64