Mounting The Inverter - SMA SUNNY BOY 3.0-US Instrucciones De Instalación

5 Mounting
15°
Figure 5 : Permitted and prohibited mounting positions
☐ Do not mount multiple inverters directly above one another.
Figure 6 : Permissible and impermissible arrangements of multiple inverters
5.2

Mounting the Inverter

Additionally required mounting material (not included in the scope of delivery):
☐ Three screws suitable for the support surface (diameter: 8 mm (0.31 in))
☐ Three washers suitable for the screws (outer diameter: 16 mm to 24 mm (0.62 in to 0.94 in))
☐ If necessary, three screw anchors suitable for the support surface and the screws
☐ To secure the inverter against theft: one padlock suitable for outdoor use
Padlock dimensions:
• Diameter of the shackle: 8 mm to 10 mm (0.31 in to 0.39 in)
• Width of the shackle (inner dimension): 30 mm to 40 mm (1.18 in to 1.57 in)
• Height of the shackle (inner dimension): 30 mm to 40 mm (1.18 in to 1.57 in)
22 SB30-77-1SP-US-40-IA-xx-13
SMA Solar Technology America LLC
Installation Manual