Kenwood NEXEDGE NX-230EX Manual De Instrucciones página 35

SIGNALING
■ Quiet Talk (QT)/ Digital Quiet Talk (DQT)
Your dealer may have programmed QT or DQT signaling on
your transceiver channels. A QT tone/ DQT code is a
sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
Operator Selectable Tone (OST)
If a key has been programmed with [OST], you can
reprogram the QT/DQT settings on each of your channels.
1 Select your desired channel.
2 Press and hold the key programmed as [OST] for
1 second.
3 Press
• Your dealer can set up to 40 tones/codes.
4 Press
5 When you have fi nished operating using OST, press the
[OST] key again to turn the OST function OFF.
■ Radio Access Number (RAN)
RAN is a signaling system designed for digital radio
communications.
When a channel is set up with a RAN, squelch will only
open when a call containing a matching RAN is received.
If a call containing a diff erent RAN is made on the same
channel you are using, you will not hear the call. This allows
you to ignore (not hear) calls from other parties who are
using the same channel.
/ to select your desired tone or code.
to save your new setting.
25