HP Scanjet 7600 Serie Manual Del Usuario página 19

4 Slide the negative holder into the slide holder on the bottom side of the TMA light
source.
Complete the scanning process
1 Place the transparent materials adapter (TMA) light source into the positioning
plate with the slides or negatives facing down. The TMA cable should fit in the
groove that is on the same end of the positioning plate as the reference marks.
Place the TMA light source on the positioning plate
2
Press the Scan Picture button (
3 In the HP Scanning dialog box, select Scan slides using transparent materials
adapter or Scan negatives using transparent materials adapter. Click Scan.
4 When you are finished scanning, click Scan to scan another slide or negative, or
click Done.
User's manual
) on the front of the scanner.
15