Lcd Brightness; Horn Alert; Public Address (Pa) - Kenwood TK-7180 Manual De Instrucciones

LCD B
RIGHTNESS
The LCD backlight can be turned off or set to low or high levels. To cycle through
the brightness settings, press the key programmed as LCD Brightness.
• Each press of LCD Brightness cycles the brightness level from high to low to off and
then back to high.
H A
ORN LERT
To use the Horn Alert function, your dealer must install an optional KAP-2 unit.
When a call is received that has a correct DTMF, 5-tone, or FleetSync signal,
Horn Alert causes the vehicle horn or some other external alert to sound. This
function notifies you of a received call when you are out of your vehicle.
Toggle Horn Alert ON and OFF by pressing the key programmed as Horn Alert.
• The icon appears on the display while Horn Alert is active.
P A
UBLIC DDRESS
To use the Public Address system, your dealer must install an optional KAP-2 unit
and an external speaker. This function causes all audio input via the microphone
to be amplified and output from the external speaker.
To use the PA system:
1 Press the key programmed as Public Address.
• The icon appears on the display while the PA system is active.
2 Press the microphone PTT switch, then speak into the microphone.
• Use the Volume Up and Volume Down keys to adjust the audio output from the
external speaker.
3 Press the Public Address key again to return to Normal Operation Mode.
(PA)
23