Connecting A Usb Device; Connecting An Ipod/Iphone - Kenwood DMX8020DABS Manual De Instrucciones

Connection/Installation
When connecting to an external amplifier,
5
connect its ground wire to the car's chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
6 External I/F
(DMX8020DABS only)
Maximum power supply current : 12 V = 500 mA
7 TV tuner remote output
This jack accepts either AV-IN (CA-C3AV;
8
optional accessory) or camera input.
For more information, see To set up the
camera assignment settings (P.56) in the
Instruction Manual.
Dashboard camera interface
9
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.19)
10 Accessory 7: GPS Antenna
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may
cause a drop in positioning accuracy.
11 Accessory 4: Bluetooth Microphone
12 Connect to vehicle's steering remote harness.
Contact your KENWOOD dealer for details.
13 Rear view camera input (Yellow)
14 Front view camera/Dashboard camera
input (Yellow). See To set up the camera
assignment settings (P.56) in the
Instruction Manual.
Visual Output (Yellow)
15
Ñ
Securing the USB extension cable
Secure the USB extension cable with insulating
tape or the like so that its connectors are not
disconnected.
18
Ñ

Connecting a USB device

Accessory 3 (Gray) (1 m)
Accessory 2 (Black) (1 m)
USB device [2]
USB (Gray) terminal
USB (Black) terminal
USB maximum power supply current :
[1]
DC 5 V = 1.5 A
[2] Sold separately
See Securing the USB extension cable
[3]
(P.18).
[4] DMX8020DABS only
Ñ

Connecting an iPod/iPhone

KCA-iP103 (0.8m)
[3]
Accessory 3 (Gray) (1 m)
Accessory 2 (Black) (1 m)
USB (Gray) terminal
USB (Black) terminal
iPhone (with Apple CarPlay)
KCA-iP103 (0.8m)
[3]
[3] [4]
[3]
[1] [4]
[1]
iPod/iPhone
[2]
[4] [6]
[4]
[1] [5] [6]
[1]
[2]