Furman PS-8RE III Manual De Usuario página 2

P S - 8 R E I I I - P O W E R C O N D I T I O N E R / S E q U E N C E R
Introduction
Thank you and congratulations on your purchase of your
Furman PS-8RE III Surge Protector / Power Sequencer
with Furman's exclusive SMP+ Technology. No other 10
Amp Surge Protector / Power Sequencer offers a better
combination of value and performance. Furman has de-
signed the PS-8RE III to provide many years of reliable
service. Please take a moment to read this manual and
learn about the many features and benefits that the PS-
8RE III has to offer.
Important Safety
Insructions
1. Please read and follow all instructions.
2. Please keep these instructions.
3. Please heed all warnings.
4. WARNING: This device is intended for indoor use only.
Do not use this device in or near water. To reduce the risk
of fire or electric shock, do not expose this device to rain
or moisture.
5. CAUTION: To reduce risk of shock, please disconnect
the PS-8RE III from AC power before servicing any equip-
ment connected to the PS-8RE III.
6. Clean only with dry cloth.
7. CAUTION: Do not install near any heat sources such
as radiators, heat registers, stoves, or other equipment
that may produce extreme heat.
8. Protect power cords from being walked on or pinched,
particularly at plugs and convenience outlets.
9. Please, only use accessories specified by the manu-
facturer.
10. Refer all servicing to qualified personnel. Servicing is
required when the unit has been damaged in anyway or
fails to operate.
11. WARNING: Do not use power cord as the main
power disconnect. The device is intended for AC power
sequencing.
12. Do not defeat the safety purpose of the Schuko plug.
A Schuko plug has two pins and a grounding contact or
receptacle. If the Schuko plug does not fit into your outlet,
please consult an electrician for assistance
13. This device is supplied with an IEC-C13 to CEE-7/7
Schuko plug. Any prospective replacement cord must
comply with the minimum ratings of the line cord originally
supplied with this device and be HAR Certified for use in
the country in which the unit is deployed.
14. WARNING: This device must be connected to an AC
outlet with a protective earth ground connection
Features
Sequenced Outlets allows large A/V systems to be safely
power cycled on and off with the press of a single switch
SMP Surge Protection Furman's exclusive Series
Multistage Protection (SMP) Technology prevents
equipment down-time by monitoring and quickly reacting
to extreme line voltage conditions.
LiFT filtration – Uses a finely tuned low-pass filter to reduce
differential AC noise. LiFT is remarkable in its ability to
linearly filter AC noise such that the attenuation curve is
continuous over a wide bandwidth.
Remote Legacy style interface with Phoenix type
connector allows remote operation and compatibility with
Furman legacy equipment.
Rear Panel Lighting BNC connector for gooseneck lamps
Multi-Color LED Indicators provide status at a glance.
9 Outlets IEC-C13; 1 front / 8 in rear panel
2.5M Power Cord – IEC-C13 to CEE-7/7, (IEC Strain
Relief Cage)
Three Year Limited Product Warranty See warranty
1