Metz mecablitz 44AF-2 digital Manual De Instrucciones página 117

Pentax
The flash unit supports Pentax is wire-
less P-TTL Remote System in slave flash
mode.
This means that one or more slave flash
units can be controlled remotely from a
master or controller flash unit on the
camera (e.g. mecablitz 64AF-1P digital)
or from the camera master.
Slave flash unit 44AF-2 is always set to
all remote channels 1, 2, 3 and 4.
Samsung
The remote slave flash mode is not
supported by Samsung cameras.
In this way wireless remote control of
one or more slave flash units by a
master flash unit (depending on the
camera type) on the camera or by the
camera's master is possible.
For slave flash unit 44AF-2 slave group
A as well as all remote channels 1, 2, 3
and 4 are always set.
Sony
The flash unit supports the wireless
Sony remote system in the "CTRL" and
+
"CTRL " modes.
This means that one or more slave flash
units can be controlled remotely from a
master or controller flash unit on the
camera (e.g. mecablitz 64AF-2S digital)
or from the camera master (depending
on camera model).
For slave flash unit 44AF-2S, slave
group RMT as well as all remote chan-
nels 1, 2, 3 and 4 are always set.
Fujifilm
At the time of printing this instruction
+
manual, FUJIFILM cameras does not
support the remote slave function.
The 44AF-2 digital automatically swit-
ches to the TTL mode of operation after
around 1-2 seconds after pressing the
"SL" button.
When remote slave mode is supported
by FUJIFILM cameras, the 44AF-2 can be
used as a slave flash unit after a firm-
ware update. Afterwards, wireless
remote control of one or more slave
flash units by a master flash unit
k
117