Safety Labels - Dolmar TM-98.14 H2D Manual De Instrucciones

EN 6

1.3 SAFETY LABELS

Your machine must be used with care. Therefore, labels have been placed on the
machine, to remind you pictorially of the main precautions to take during use.
These labels are to be considered an integral part of the machine.
Should a label fall off or become illegible, contact your Retailer to replace it.
Their meaning is explained below.
Warning: Read the Operator's
Manual before operating this
machine.
Warning: Disconnect the igni-
tion key and read the instruc-
tions before carrying out any
repair or maintenance work.
Danger! Ejected objects: Do
not operate without the stone-
guard in place.
Danger! Ejected objects: Keep
bystanders away.
1.4 REGULATIONS FOR TOWING
A kit for towing a small trailer is available on request. This
accessory is to be fitted as per the instructions provided.
When using, do not exceed the recommended drawbar
loads stated on the label and follow the safety instruc-
tions, (☛ 1.2, C-6).
Danger! Machine
rollover: Do not use this
machine on slopes
greater then 10°.
Danger of cutting yourself. Blades in movement. Do not put hands or
feet near or under the opening of the cutting plate.
Danger! Dismember-
ment: Make sure that chil-
dren stay clear of the
machine all the time when
engine is running.
max 245 N (25 kg)
SAFETY