Stihl MSE 140 C Manual De Instrucciones página 26

: Now turn tensioning screw (9 or 10)
clockwise until there is very little
chain sag on the underside of the
bar and the drive link tangs are
located in the bar groove.
: Refit the sprocket cover and screw
on the nut fingertight.
Arrow (11) indicates direction of chain
rotation.
Go to "Tensioning the Saw Chain".
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C
Models with Quick Chain
Tensioner
1
3
: Disconnect plug from power supply.
: Swing up the hinged handle (1) so
that it snaps into position.
: Turn the wingnut (2) counter-
clockwise until it hangs loose in the
chain sprocket cover (3).
: Remove the sprocket cover.
4
: Remove the tensioning gear (4) and
turn it over.
5
2
: Take out the screw (5).
: Position the tensioning gear (6)
against the guide bar (7).
: Fit and tighten down the screw (8).
English / USA
6
7
8
25