Connecting Saw To Power Supply - Stihl MSE 140 C Manual De Instrucciones

Chain brake maintenance
The chain brake is subject to normal
wear. It is necessary to have it serviced
and maintained regularly by trained
personnel. STIHL recommends that you
have the maintenance and repair work
performed by a STIHL servicing dealer
at the following intervals:
Full-time professional
users: every 3
months
Semi-professional
users (farm and
construction industry): every 6
months
Hobby and occasional
users: every 12
months
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C
Connecting Saw
to Power Supply
The voltage of your power supply and
the voltage specified on the saw must
be the same.
Outdoor operation: Connect the saw
via a ground-fault circuit breaker.
Extension cords must be suitable for
outdoor use.
Mains power outlet: Must be equipped
with a fuse or automatic circuit breaker.
If the fuse or circuit breaker is tripped
when you switch on the saw, use an
extension cord (at least 35 ft /10 m long)
that meets the specifications in the
following table.
Extension cords:
Minimum wire size for extension cords
for 120 Volt appliances:
Cord types SJW-A or SJTW-A
Round jacketed cords.
MSE 140
cord length (ft) 50 100
wire size (AWG) 14 12
MSE 180
cord length (ft) 50 100
wire size (AWG) 10
1)
not recommended
Listed by UL, W-A marking on cable
jacket indicates "use outdoors".
Appropriate extension cords are
available in stores spezializing in
electrical equipment.
Cable drum: Always unwind the cord
completely. It should be equipped with
thermal protection.
150
10
150
1) 1)
English / USA
31