SYSTEM CONNECTIONS
■ Connecting the DVD controller
and the subwoofer/system
control
Connect the SYSTEM CONNECTOR terminal at the rear
of the subwoofer/system control to the SYSTEM
CONNECTOR terminal at the rear of the DVD controller
using the system control cable.
NS-PSW700
Y
SYSTEM
P
B
CONNECTOR
COMPONENT
VIDEO
OUTPUT
SYSTEM
CONNECTOR
DVR-700
SPEAKERS
SPEAKER IMPEDANCE
: 6 MIN.
Notes
– Make sure that the system control cable is correctly
connected. Improper connections may damage the
system due to a short-circuit.
– To prevent unwanted noise, do not place the
subwoofer too close to the DVD controller, AC
power adaptor, TV or other sources of radiation.
– Do not insert the Power cable to an AC outlet until
all connections are completed.
16
En
VIDE
Tighten the screws.
Tighten the screws.
MAINS