Preparation; Getting Started; Inserting Batteries Into The Remote Control; Using The Remote Control - Yamaha DVX-700 Manual De Instrucciones

PREPARATION

■ Inserting batteries into the remote
control
Press
1
3
1 Press
on the battery cover and open the cover.
2 Insert the two supplied batteries (AA, R6, UM-3) into
the battery compartment.
Insert the batteries according to the polarity markings
(+ and –).
3 Close the battery cover.
Replacing the batteries
If the batteries run low, the effective operation distance of the
remote control decreases considerably. If this happens,
replace the batteries with two new ones as soon as possible.
Notes
– Do not use an old battery together with new one.
– Do not use different types of batteries (for
example, alkaline and manganese) together. Each
type of battery has its own characteristics even if
they are similar in shape.
– If the batteries run out, immediately remove them
from the remote control to prevent an explosion or
acid leak.
– Dispose of the batteries according to the regional
regulations.
– If a battery starts leaking, dispose of it
immediately.
Be careful not to let leaking battery acid come into
contact with your skin or clothing. Before inserting
new batteries, wipe the compartment clean.
– Replace the batteries within two minutes to
preserve the preset code in the remote control.
Hint
Remove the transparent sheet before using the remote
control.

GETTING STARTED

2

■ Using the remote control

Use the remote control within 6 m of the DVD controller
and point it toward the remote control sensor.
STANDBY / ON
30˚ 30˚
ENTER
TV/ STB
CH
Basic operation of the remote control
1 Use the Input selection buttons on the remote control
to select the input source you wish to control (for
example DVD/USB).
→
The selected source appears in the front panel
display.
When the button contains several input sources such
as DVD/USB and INPUT 1-4 buttons, the input
source switches each time you press the button.
TV VOL
TUNER
TV INPUT
DVD/ USB INPUT 1-4
POSITION AREA
2 Operate the desired function (for example, h or b
/ a).
Notes
– Be careful not to spill liquid on the remote control.
– Be careful not to drop the remote control.
– Do not leave the remote control in the following
places:
– hot or humid places, such as near a heater or in a
bathroom
– extremely cold places
– dusty places
– To operate your TV with the remote control, you
need to set the preset code.
Refer to "Setting the preset code" on page 58 for
how to change the preset code.
EJECT
Within 6 m
CH
VOLUME
MUTE
Input
selection
DOCK
buttons
SOUND TEST
21
3
En