Initial Settings Menu; Video Output - Yamaha DVX-700 Manual De Instrucciones

This setup is carried out via the TV,
enabling you to customize the DVD
controller to suit your particular
requirements
DVX-700 WP87020
STANDBY/ON
POWER
TV STB
FUNC. 10KEY
MOVIE MUSIC SPORTS GAME
STEREO ENHANCER NIGHT SLEEP
AUDIO DELAY ZOOM ON SCREEN
DISP. MODE
BLUETOOTH
ON OFF
AUDIO SUBTITLE ANGLE
TOP MENU MENU
PRESET
INFO.
A-E ENTER A-E
SETUP RETURN
CODE SET
TV/ STB
TV INPUT TUNER MUTE
DVD/ USB INPUT 1-4 DOCK
POSITION AREA SOUND TEST
1 Press DVD/USB repeatedly to switch the input source
to DVD.
2 Press SETUP on the remote control.
DVD setup menu appears.
3 Press
/ / /
then press ENTER.
4 Press
/ to highlight the item that you want to
adjust, then press ENTER.
Refer to the following explanations.
5 Press ENTER to confirm.
Repeat steps 3 and 4 if necessary.
6 Press SETUP to close the menu.
Hint
If the settings you have selected are not appropriate,
you can reset DVD settings to the initial factory
settings (Page 57).
38
En

INITIAL SETTINGS MENU

When using Numeric
keypad 0-9
Switch FUNC./10KEY to
10KEY
Numeric keypad 0-9
to highlight [Initial Settings],

■ Video Output

Configure the video output settings.
Initial Setting
Video Output TV Screen
Language Component Out
Display HDMI Resolution
Options HDMI Color
TV Screen
Set the aspect ratio according to the TV you have
connected.
[4:3 (Letter Box)] (default)
Select this if you have a conventional TV. In this case, a
wide picture with black bands on the upper and lower
portions of the TV screen will be displayed.
[4:3 (Pan&Scan)]
Select this if you have a conventional TV and want both
sides of the picture to be trimmed or formatted to fit your
TV screen.
Note
If the disc does not support an aspect ratio of 4:3
(Pan&Scan), the content is displayed in 4:3 (Letter
Box).
[16:9 (Wide)]
Select this if you have a wide-screen TV.
[16:9 (Compressed)]
Select this if a wide-screen TV is connected to the DVD
controller with an HDMI cable, and set HDMI Resolution
to either [1920 x 1080p], [1920 x 1080i], or [1280 x
720p]. When playing back a content whose aspect ratio is
4:3, black bars cover the sides of the screen.
Component Out
Select the video type output via the COMPONENT
VIDEO OUTPUT jacks.
[Progressive]
Select this if the connected TV has progressive display
function. When you select this and press ENTER, the
confirmation screen appears.
Press ENTER again to confirm the setting. If you want to
cancel the setting, press RETURN.
4:3 (Letter Box)
Interlace
720x480p
Component