Specify The Type Of Amplifier You Have Connected - Boss GT-001 Manual Del Usuario

4

Specify the type of amplifier you have connected

In order to ensure optimal sound, you should specify the type of amp you've connected to the GT-001. Please
take a moment to do this.
1.
Press the [MENU] button.
2.
Choose "SYSTEM" with the value knob, and press the
[ENTER] button.
3.
Choose "OUTPUT" with the value knob, and press the
[ENTER] button.
4.
Choose the type of amp with knob [4].
Value
JC-120
SMALL AMP
COMBO AMP
STACK AMP
JC-120 RETURN
COMBO RETURN
STACK RETURN
LINE/PHONES
5.
Press the [EXIT] button a number of times.
MEMO
• The SP TYPE parameter is valid only if OUTPUT is set to "LINE/PHONES. " For details on the SP TYPE
parameter, refer to "Parameter Guide" (PDF file).
• When using headphones, you won't be able to obtain a sound that is typical of a guitar amp unless
you turn on PREAMP. We recommend that you turn on PREAMP whenever you're using headphones. To
turn on PREAMP, as shown in procedure 1 in "4 Editing: Editing the Effects" (p. 7), choose [EFFECT] " "Pr
A" or "Pr B" and press the value knob. For details about PREAMP settings, refer to "Parameter Guide"
(PDF file).
Explanation
Choose this if connected to the guitar input of a Roland JC-120 guitar amp.
Choose this if connected to a small guitar amp.
Choose this if connected to the guitar input of a combo-type guitar amp (i.e., a single unit that
contains the amp and speaker) other than the JC-120.
For some types of guitar amps, the "JC-120" setting might produce better results.
Choose this if connected to the guitar input of a stack-type guitar amp (i.e., one in which the amp and
speaker are separate units).
Choose this if connected to the RETURN jack of the JC-120.
Choose this if connected to the RETURN jack of a combo-type guitar amp.
Choose this if connected to the RETURN jack of a stack-type guitar amp. You should also choose
"STACK RETURN" if you're using a guitar power amp together with a speaker cabinet.
Choose this if you're using headphones, or if the GT-001 is connected to monitor speakers, mixer, or
digital recorder.
Getting Ready
[ENTER] button Value knob
[MENU] button
Knob [4]
3