Personal Protective Equipment; Safety Devices On The Product - Husqvarna Soff-Cut 150 E Manual Del Usuario

• Use grounded extension cables.
• When you operate a power tool outdoor, use
extension cable that is applicable for outdoor
operation. Use of a power cord applicable for
outdoor operations decreases the risk of electrical
shock.
• Keep the connection to the extension cable dry and
off the ground.
• Keep the extension cable away from heat, oil, sharp
edges or moving parts. Damaged or too large
extension cables increases the risk of electrical
shock.
• Make sure that the extension cables are not
damaged and in good condition. Do not use the
product if a cable is damaged. Let an approved
service center repair the product.
• To prevent overheating, do not use the extension
cable while it is folded.
• Make sure that the extension cable is behind you
when you use the product. This is to prevent
damage to the power cord.
• Use only approved extension cables with sufficient
length.

Personal protective equipment

WARNING: Read the warning instructions
that follow before you use the product.
• Always use correct personal protective equipment
when you operate the product. The personal
protective equipment does not erase the risk of
injury. The personal protective equipment decreases
the grade of injury if an accident occurs. Let your
dealer help you select the right equipment.
• Use approved eye protection while you operate the
product.
• Do not use loose, heavy and not applicable clothing.
Use clothes that let you move freely.
• Use approved protective gloves that enables a solid
hold.
• Use rubber protective gloves that prevents skin
irritation from wet concrete.
• Use an approved protective helmet.
• Always use approved hearing protection while you
operate the product. Noise for a long period can
cause noise-induced hearing loss.
• The product makes dust that contain dangerous
chemicals. Use an approved breathing protection.
• Use boots with steel toe-caps and non-slip soles.
• Make sure that you have a first aid kit near.
• Sparks can occur when you operate the product.
Make sure that you have a fire extinguisher near.
1038 - 002 - 17.10.2019

Safety devices on the product

WARNING: Read the warning instructions
that follow before you use the product.
• Do not use a product with defective safety devices.
Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
• Do not make modifications on safety devices. Do not
use the product if protective plates, protective
covers, safety switches or other protective devices
are not attached or are defective.
To do a check of the power switch
The power switch is used to start and stop the motor.
1. Push the lock button (A) and pull the power switch
(B) up to start the motor.
2. Push the power switch down to stop the motor.
3. Do a check that the motor and the blade stop. Make
sure that the cutting blade can rotate freely until it is
fully stopped.
A
B
7