Adjusting The Keyboard Sensitivity And The Sound; Adjusting The Keyboard Sensitivity (Key Touch); Adding Reverberation To Sounds (Reverb Eff Ect); Adjusting The Brilliance Of The Sound - Roland RP301R Manual Del Usuario

& &

Adjusting the keyboard sensitivity and the sound

Adjusting the Keyboard Sensitivity
( Key Touch)
Here's how to change the way in which the sound responds to your
keyboard dynamics. You can adjust the response as appropriate for
your playing strength.
1.
Press and hold the [Split] button and press the
[Transpose] button.
The display looks more or less as follows (this depends on the last
function you selected since switching the RP301R on).
Depending on which function is displayed, there may be one or two
white arrows in the top line. If the arrows appear in the bottom line,
press the [Metronome] button once.
2.
Use the [–] or [+] button to select the "KeyTouch" function.
3.
Press the [Metronome] button to activate value selection.
Now, the bottom line contains one or two white arrows:
KeyTouch
L2
4.
Press the [–] [+] buttons to adjust the keyboard touch.
Display/Value
KeyTouch
Fixed
FIX
KeyTouch
Super Light
L2
KeyTouch
Light
L1
Medium
KeyTouch
M
(default)
KeyTouch
Heavy
H1
KeyTouch
Super Heavy
H2
5.
Again press and hold the [Split] button and press the
[Transpose] button to leave Function mode.
Memo
When the power is turned off , the RP301R's settings will return
to their default state. However, you can save this setting so that
it will still be available the next time the power is turned on. To
save the setting, proceed as described in "Saving the Settings
(Memory Backup)" (p. 23).
14
Explanation
The sound plays at one set volume, regard-
less of the force used to play the keys.
This setting produces the lightest keyboard
touch.
You can achieve fortissimo (ff ) play with a
less forceful touch than "medium, " so the
keyboard feels lighter. This setting makes it
easy to play, even for children.
This sets the standard keyboard touch. You
can play with the most natural touch. This is
the closest to the touch of an acoustic piano.
You have to fi nger the keyboard more
forcefully than "medium" in order to play
fortissimo (ff ), so the keyboard touch feels
heavier. Dynamic fi ngering adds even more
feeling to what you play.
This setting produces the heaviest keyboard
touch.
Adding Reverberation to Sounds
( Reverb Eff ect)
You can apply a reverb eff ect to the notes you play on the keyboard.
With the reverb eff ect, you obtain a pleasant reverberation, making
it sound as if you were performing in a concert hall or similar space.
1.
Hold down the [Piano] button and press the [–] [+]
buttons to adjust the depth for the reverb eff ect.
Value Explanation
Reverb
Reverb will not be applied.
OFF
1~10 Adjust the reverb depth over ten levels. Higher values
(default: 5)
produce deeper reverb.
Memo
When the power is turned off , the RP301R's settings will return
to their default state. However, you can save this setting so that
it will still be available the next time the power is turned on. To
save the setting, proceed as described in "Saving the Settings
(Memory Backup)" (p. 23).

Adjusting the Brilliance of the Sound

Here's how to adjust the brilliance of the sound.
1.
Hold down the [Other] button and press the [–] [+]
buttons to adjust the brightness of the sound.
Value Explanation
Adjust the brilliance of the sound. Positive (+) settings
-10~0~+10
brighten the tone, and negative (–) settings make it
(default: 0)
more mellow.
Memo
When the power is turned off , the RP301R's settings will return
to their default state. However, you can save this setting so that
it will still be available the next time the power is turned on. To
save the setting, proceed as described in "Saving the Settings
(Memory Backup)" (p. 23).