Initializing The Memory (Format Media); Making The Power Automatically Turn Off After A Time (Auto Off ) - Roland RP301R Manual Del Usuario

& &

Initializing the memory (Format Media)

You can erase all songs saved in the internal memory or reformat
the USB memory (sold separately) you connected.
Note
• If you select "User", this function erases all songs that have
been saved in the internal memory ("U"). If you select "USB",
all data on the USB memory will be erased. In either case, the
erased data cannot be recovered, so we recommend that you
check the contents before you proceed.
• If you're using new USB memory (sold separately) with the
unit for the fi rst time, you'll need to initialize (format) the USB
memory before using it. The unit can't use a USB memory that
has not been initialized.
If you want to format a USB memory, connect the USB memory to
the USB memory connector (p. 9).
1.
While holding down the [Split] button, press the
[Transpose] button.
2.
Use the [–] [+] buttons to select "Format."
Format
3.
Press the [Metronome] button.
User
& & Making the power automatically turn off after a time ( Auto Off )
With the factory settings, the unit's power will automatically
be switched off 30 minutes after you stop playing or operating
the unit.
If you don't want the power to turn off automatically, change the
"Auto Off " setting to "OFF" as follows. You can also select a shorter
duration.
1.
While holding down the [Split] button, press the
[Transpose] button.
2.
Use the [–] [+] buttons to select "Auto Off ".
3.
Press [Metronome] to confi rm your selection.
The display changes to:
Auto Off
30
If you decide not to proceed with the format, press the [Split]
button.
4.
Use the [–] [+] buttons to select the memory that you
want to initialize.
5.
Press the [Metronome] button.
A confi rmation message will appear.
Format?
N Y
6.
Press the [+] button to select "Y."
Formatting of the media will begin.
If you decide not to initialize, press the [–] button.
Once the initialization is fi nished, you'll be returned to the screen
you were in at step 2.
7.
While holding down the [Split] button, press the
[Transpose] button to fi nish the procedure.
4.
Press the [–] [+] buttons to select the Auto Off duration.
If you don't want the power to turn off automatically,
choose "OFF."
Value Explanation
The power will automatically turn off when 240 minutes
240 (4 hours) have passed since you last played or operated
the unit.
The power will automatically turn off when 10 or 30
10
minutes have passed since you last played or operated
30 (default)
the unit.
OFF The power will not turn off automatically.
5.
While holding down the [Split] button, press the
[Transpose] button to leave Function mode.
Memo
To save this setting, you need to perform "Backup" (see p. 23).
29