Playing Tracks In Random Order (Shuffle Play); Playing Tracks In The Desired Order (Programme Play) - Sony MJ-L1 Manual De Instrucciones

Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on the MD in
random order.
POWER m ON
2
3
2
1
Press MD.
The unit enters MD play mode.
2
Press PLAY MODE (or P.MODE on the
remote) repeatedly until "SHUFFLE"
appears in the display.
3
P r e s s fl .
" J " appears and then all the tracks
play in random order.
To cancel shuffle play
Press and then press PLAY MODE
repeatedly until "SHUFFLE" and
"PROGRAM" disappear from the display.
The tracks continue playing in their original
order.
To skip an undesired track
Turn the JOG dial clockwise (or press +
on the remote).
Playing Tracks in the
Desired Order
(programme play)
You can programme up to 25 tracks to play
in any order you choose. You can do this
by designating the tracks in the order you
want them to play.
1
POWER m ON
2
„
4
3
6
Numeric
buttons
1
Press MD.
The unit enters MD playing mode.
2
Press PLAY MODE (or P.MODE on the
remote) repeatedly until "PROGRAM"
appears in the display.
3
Turn the JOG dial (or press = /+
on the remote) to choose a track.
The track number and the total playing
time including the selected track appear
in the display, and the track number
flashes in the music calendar. (The
programme is not entered at this time.)
›
Go to previous
track
TOC
Track number
4
Press ENTER/YES.
The step number appears for about one
second, then the total playing time
appears. (This shows that the
programme has been entered.)
5
To programme additional tracks, repeat
6 1 steps 3 and 4.
6
P r e s s fl .
All the tracks play in the order you
choose.
To cancel the programme play
Press
repeatedly until "PROGRAM" and
"SHUFFLE" disappears from the display.
The tracks continue playing in their original
3
„
order.
To select tracks using the number
buttons on the remote
2
>10
In step 3, press the number buttons in the
order you want to programme. Each time
you press a button, the track you selected is
programmed.
You don't need to press ENTER/YES.
To programme a track with a number
greater than 10, press >10 first, then enter
the corresponding digits.
If the track number is 100 or more, press
>10 twice and enter the number.
Example:
To locate track number 30, press >10, 3,
To locate track number 100, press >10,
To change the programme
To
Add a track at
the end of the
programme
Erase the entire
programme
Notes
•The programme you made remains in the
– unit even after it has been played back.
Press fl to play the same programme
Go to next
again.
track
• If "--.--" appears instead of the total
playing time during programming, this
1 2 3 4 5
PROGRAM
6 7 8 9 10
means the total playing time has
11
MD
VOLUME
exceeded 100 minutes. In this case, you
can also select other tracks.
TOC
PROGRAM
MD
VOLUME
Total playing time
Last programmed
track number
and then press PLAY MODE
and 10 in this order.
>10, 1, 10 and 10 in this order.
Operation
1.Turn the JOG dial
until the desired track
number appears in
the display.
2.Press ENTER/YES.
During stop, press
the player.
Chapter 3: Playing MDs
4
6 9
11
GB
13
on