Playing Tracks In Random Order (Shuffle Play); Playing Tracks In The Desired Order (Programme Play) - Sony MJ-L1 Manual De Instrucciones

Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on the CD in
random order.
POWER m ON
2
3
2
1
Press CD.
The unit enters CD play mode.
2
Press PLAY MODE (or P.MODE on the
remote) repeatedly until "SHUFFLE"
appears in the display.
3
P r e s s fl .
" J " appears and then all the tracks
play in random order.
To play the tracks in original order
Press PLAY MODE repeatedly until
"SHUFFLE" and "PROGRAM" disappear
from the display. The tracks continue
playing in their original order.
To skip an undesired track
Turn the JOG dial clockwise (or press +
on the remote).
Playing Tracks in the
Desired Order
(programme play)
You can programme up to 24 tracks to play
in any order you choose. To do this,
designate the tracks in the order you want
them to play.
POWER m ON
2 1
EDIT/NO
4 6
2
6
3
Numeric
buttons
1
Press CD.
The unit enters CD play mode.
2
Press PLAY MODE (or P.MODE on the
remote) repeatedly until "PROGRAM"
appears in the display.
3
Turn the JOG dial (or press = /+
on the remote) to choose a track.
The track number and the total playing
time including the selected track flashes
in the display. (The programme is not
entered at this time.)
› –
Go to next
Go to previous
track track
CD
VOLUME
Track number
4
Press ENTER/YES.
The step number appears for about one
second, then the total playing time
appears. (This shows that the
programme has been entered.)
Last programmed
track number
5
To programme additional tracks, repeat
steps 3 and 4.
6
P r e s s fl .
All the tracks play in the order you
choose.
To play the tracks in original order
Press PLAY MODE repeatedly until
"PROGRAM" and "SHUFFLE" disappear
from the display. The tracks continue
3
playing in their original order.
To select tracks using the number
buttons on the remote
In step 3, press the number buttons in the
order you want to programme. Each time
you press a button, the track you selected is
programmed.
You don't need to press ENTER/YES.
To programme a track with a number
greater than 10, press >10 first, then enter
the corresponding digits.
Example: To locate track number 30, press
>10, 3, and 10 in this order.
>10
To change the programme
To
Add a track at
the end of the
programme
Erase the entire
programme
* You can also add a track during
playback when you select tracks with
the number buttons on the remote.
Notes
•The programme you made remains in
memory even after it has been played
back.
Press fl to play the same programme
again.
•If "--.--" appears instead of the total
playing time during programming, this
PROGRAM
7
means the total playing time has exceeded
100 minutes. You can still select other
tracks.
1 3 5
PROGRAM
7
9
11
CD
VOLUME
Total playing time
Operation
1.Turn the JOG dial
until the desired track
number appears in
the display.*
2.Press ENTER/YES.
During stop, press on
the player.
Chapter 2: the CD Player
GB
9