Chapter 8:
Additional
Features
Falling Asleep to Music
Waking Up to Music
Timer-Recording Radio
Programmes
Connecting Optional
Equipment
GB
26
Chapter 8: Additional Features
Falling Asleep to
Music
You can set the stereo system to turn off
automatically so you can go to sleep to
music (sleep timer).
Before setting the sleep timer, make sure
the clock has been set correctly.
You can set the sleep timer even if you have
already set the wake-up timer.
Use the button on the remote for this
operation.
SLEEP
1
Play your favourite sound source (a
tape, the tuner or a CD).
2
Press SLEEP repeatedly to choose how
long you want the music to play.
The sleep time indication appears in the
display.
n 90 n 80 ... 10 n OFF
The minute indication sets the timer to
turn the power off after 90 to 10 minutes
in ten minute intervals.
To cancel the sleep timer
Press SLEEP repeatedly until "OFF"
appears in the display.
To check the remaining time before
the sleep timer turns off the system
Press SLEEP once.
The remaining time (in minutes) is
displayed for several seconds.
To change the remaining time while
the sleep timer is on
Press SLEEP repeatedly to select the
remaining time you desire.
Waking Up to Music
You can wake up to music at a preset time.
You only need to set the timer once. The
timer will remain activated until you reset it
or disconnect the main leads.
Before setting the timer, make sure the
clock has been set correctly.
,9
POWER m ON
TIMER
3
SELECT
4,5,6,8
5,6,7
1
Prepare the sound source.
To wake up to the radio
Tune in the preset station you want.
To wake up to a CD
Insert a CD. If you want it to play from a
specific track, do the necessary proce-
dures for programmed CD play (see
"Playing Tracks in the Desired Order
(programme play)").
To wake up to a MD
Insert a MD.
2
Press VOLUME +/– to adjust the
volume.
After you finish adjusting, stop playing
CD or MD.
3
Press TIMER SET repeatedly until
"DAILY TIMER ?" appears in the
display.
MD
CD
VOLUME
4
Press ENTER/YES.
"ON" appears and hour digits flash in
the display.
5
Set the time you want the system to
turn on.
1 Use the JOG dial to set the hour.
CD
MD
VOLUME
DAILY
flashing
2