Publicidad
Idiomas disponibles
Idiomas disponibles
03/12/18 15:39:02 3CKPB610_110
8.
Install the oil strainer screen, spring and
drain plug.
Oil Drain Plug Torque:
20 N·m (2.0 kgf·m , 14 lbf·ft)
9.
Fill the crankcase with the recommended
grade oil; approximately:
1.1 (1.2 US qt , 1.0 Imp qt)
10.
Install the oil filler cap/dipstick.
11.
Start the engine and let it idle for 3 5
minutes.
12.
2 3 minutes after stopping the engine,
−
check that the oil level is at the upper
level mark on the oil filler cap/dipstick
with the scooter upright on firm, level
ground. Make sure there are no oil leaks.
100
−
Publicidad
