Publicidad
Idiomas disponibles
Idiomas disponibles
03/12/18 15:39:21 3CKPB610_112
2.
Disconnect the spark plug cap ( ) from
the spark plug.
3.
Clean any dirt from around the spark plug
base.
Remove the spark plug using the spark
plug wrench furnished in the tool kit.
(3)
(3) Spark plug cap
102
3
4.
Inspect the electrodes and center
porcelain for deposits, erosion or carbon
fouling. If the erosion or deposit is heavy,
replace the plug. Clean a carbon or wet-
fouled plug with a plug cleaner, otherwise
use a wire brush.
5.
Check the spark plug gap (
wire-type feeler gauge. If adjustment is
necessary, bend the side electrode (
carefully.
The gap should be:
0.80 0.90 mm (0.031 0.035 in)
−
(4)
(4) Spark plug gap
4
) using a
5
)
−
(5)
(5) Side electrode
Publicidad
