Publicidad
Idiomas disponibles
Idiomas disponibles
03/12/18 15:42:16 3CKPB610_135
Finishing Touches
After washing your scooter, consider using
a commercially-available spray cleaner/
polish or quality liquid or paste wax to finish
the job. Use only a non-abrasive polish or
wax made specifically for motorcycles or
automobiles. Apply the polish or wax
according to the instructions on the
container.
If a surface on your scooter is chipped or
scratched, your Honda dealer has touch-up
paint to match your scooter's colour. Be
sure to use your scooter's colour code (page
91
) when you buy touch-up paint.
Removing Road Salt
The salt contained in the road surface
freezing prevention medicine which a road
was sprayed with in winter, and the
seawater becomes the cause which rust
occurs in.
Wash your scooter by the following point
after it runs through such a place.
1.
Clean the scooter using cool water (page
123
).
Do not use warm water.
This worsens the effect of the salt.
2.
Dry the scooter and the surface of the
metal is protected with the wax.
125
Publicidad
