Citizen CT-S751 Manual De Usuario página 63

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Individual setting mode
Set the memory switches individually.
Do the settings while confirming the memory switch function and settings on the print-
out.
1.
Load paper.
2.
While the paper cover is open, press and hold the FEED button and turn on the power.
3.
Press the FEED button twice and close the paper cover.
The printer enters the mode for setting memory switches individually.
The printer prints "Memory SW (1)" and the current setting, 0 (off) or 1 (on).
(The current settings for memory switches 7 to 13 are not printed.)
Current memory switch
4.
Press the FEED button.
Each press of the FEED button cycles through the list of memory switches in the following
sequence: "Memory SW (1)" > "Memory SW (2)" > ..."Memory SW (11)" or "Memory SW (13)"
> "Save To Memory" > "Memory SW (1)".
Press the FEED button until the number for the memory switch you want to change is printed.
5.
Press the FEED button for at least two seconds.
A setting for the memory switch is printed, through the cycle, each time the FEED button is
pressed for at least two seconds.
Press the FEED button for at least two seconds to cycle through the list until the function of
the memory switch you want to change is printed.
6.
Press the FEED button.
A setting is printed each time the FEED button is pressed in order through the cycle.
When the current settings are printed, the COVER LED lights.
Press the FEED button until the setting you want is printed.
7.
Press the FEED button for at least two seconds.
The selected settings are set.
The next memory switch function and settings are printed.
Memory switch function
Current setting
Current setting
63

Publicidad

Tabla de contenido
loading

Tabla de contenido