Citizen CT-S751 Manual De Usuario página 9

Do not use the printer under the following conditions.
 Avoid locations subject to vibration or instability.
 Avoid locations where the printer is not level.
Ÿ The printer may fall and cause an injury.
Ÿ The quality of printing may deteriorate.
 Do not obstruct the printer's air vents.
 Do not place anything on the printer.
 Do not cover or wrap the printer in cloth or blankets.
Ÿ Doing so could cause heat to build up and deform the case or start a fire.
 Avoid using the printer near a radio or TV set or from supplying it from the same
electric outlet as these appliances.
 Avoid using the printer interconnected with a cable or cord that has no protection
against noise.
(For interconnections, use shielded or a twisted pair of cables and ferrite cores,
or other anti-noise devices.)
 Avoid using the printer with a device that is a strong source of noise.
Ÿ The printer may have an adverse effect on nearby radio or TV transmis-
sions. There may also be cases when nearby electrical appliances adverse-
ly influence the printer, causing data errors or malfunction.
 Installed in any orientation other than those specified.
Ÿ Malfunction, failure, or electric shock may result.
 Connect the printer to a ground.
Ÿ Electric leakage may cause an electric shock.
 Do not connect the printer's ground to any of the following:
Ÿ A gas explosion could result.
* Gas piping
* Telephone line ground
* Lightning rod
Ÿ If lightning strikes a large surge of current may cause fire or shock.
* Water pipes
Ÿ Plastic water pipes should not be used for grounding. (Those approved by a
Waterworks Department may be used.)
 Before connecting or disconnecting the grounding lead to or from the
printer, always unplug it from the electric outlet.
CAUTION
9
— —