Erreka VIVO-M203 Manual Del Instalador página 87

13
U241M
14
U141N
15
U241R
16
U241S
17
U241T
Finish opening of leaf 2 by
pressing ST1. In any case,
t h i s i s c a r r i e d o u t
automatically when the
opening stopper (with
C 7 0 1 , C 7 0 3 , C 7 0 4 o r
C705) or the FCA (with
C702 or C704) is reached.
Start closing of leaf 2
by pressing ST1.
P r e s s S T 1 t o s t a r t
slowdown of leaf 2 in
closing (only if slowdown
is programmed, CA01,
CA03).
Finish closing of leaf 2 by
pressing ST1. In any case,
t h i s i s c a r r i e d o u t
automatically when the
c l o s i n g s t o p p e r ( w i t h
C701, C703 or C704) or
the FCC (with C702, C704
or C705) is reached.
Start closing of leaf 1 by
pressing ST1.
STARTING UP AND PROGRAMMING
Press ST1 to start slowdown of
18
leaf 1 in closing (only if
slowdown is programmed,
CA01, CA03).
U241U
Finish closing of leaf 1 by
19
pressing ST1. In any case,
t h i s
automatically when the
closing stopper (with C701,
U241V
C703 or C704) or the FCC
(with C702, C704 or C705) is
reached.
W h e n p r o g r a m m i n g i s
20
f i n i s h e d , D 3 - D 4 s t o p
flashing (remain static) and
D2 flashes.
U255O
Press ESC to return to the
21
previous display.
U141P

The anti-trapping safety system continues to run
during the programming operations.

Pedestrian opening is programmed using F3,
meaning the travel for this pedestrian opening does
not need to be programmed.

If an obstacle is detected during programming in up-
and-over operation with C5 closing photocell
activated, this will be considered the point from
which the photocell shadow function should be
activated. This only works with Collective Opening
(A901).
i s c a r r i e d o u t
Control board VIVO-M203(M)
83