RK Rose+Krieger DuoLine S Clean Instrucciones De Montaje página 41

The manufacturer declares explicitly that the partially completed machinery meets all the relevant
provisions of the following EC directives:
2006/42/EC
2011/65/EC
Sources for the harmonised standards according to article 7, paragraph 2:
EN ISO 3744:2010
EN ISO 13857:2008
EN ISO 12100:2010-11
Source of the other technical standards and specifications applied
ÖNORM EN ISO 14644-
8:2013-06-01
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This transfer is
carried out in agreement, in electronic or paper format.
The commercial protective rights remain unaffected by this!
Important note! Important note! The partially completed machine must only be put into
operation once, if required, it has been determined that the machine in which the partially
completed machine is to be installed complies with the regulations of this guideline
Minden / 12.08.2015
Location / Date
Minden / 12.08.2015
Location/Date
Directive 2006/42/EC of the European Parliament and of the Council from
17 May 2006 on machines and amending Directive 95/16/EC (recast)
Directive 2011/65/EC of the European Parliament and of the Council of
8 June 2001 on the restriction of the use of certain hazardous substances
in electrical and electronic equipment.
Acoustics – Determination of sound power levels and sound energy levels
of noise sources using sound pressure – Engineering method in an essen-
tially free field over a reflecting plane
Safety of machinery – Safety distances to prevent hazard zones being rea-
ched by upper and lower limbs
Safety of machinery – General principles for design – Risk assessment and
risk reduction
Clean rooms and associated controlled environments – Part 8: Classificati-
on of air cleanliness by chemical concentration (ACC) (ISO 14644-8:2013)
Signature
Signature
1. Declaration of Incorporation 1. Declaration of Incorporation 1. Declaration of Incorporation
Technical Director
Signatory's position
CEO
Signatory's position
41 41 41