Measuring conductivity
Caution!
For the measurement of current, the object being tested must be switched in
series.
• For the measurement of currents up to 400 mA, place the function
q
switch
at the position
• Insert the measuring leads
• For the measurement of currents up to 2 A, place the function switch
at the position
• Insert the measuring leads
The indicator for direct voltage measurement
• Press the button
alternating current measurement
• Connect the measurement prods with the object being tested.
The measured value is shown in the display
in milliampere (mA) or ampere (A).
into the input sockets
.
into the input sockets
FUNC.
r
to switch between either direct current or
- 105 -
.
mA °C
appears.
.
z
, subject to current strength,
COM
9
8
and
2A
COM
0
8
and
.
q
.