Device features
4-figure digital display, max. value: 3999
Manual and automatic selection of the measurement conclusion
Retention of the measured value
Voltage measurements up to 600 V ~ and
Electrical current intensity measurements up to 2 A ~ and
Resistance measurements up to 40 MΩ
Continuity test
Diode test
Condensor test up to 200 µF
Frequency measurements up to 200 kHz
Impulse breadth measurement
Temperature measurement from -20°C to 1000°C
Sound level measurement from 40 dB to 100 dB
Light measurement from 4000 to 40000 Lux
Air humidity measurement from 30% to 90% RH
(Relative Humidity)
Overload protection
Automatic polarity function
Automatic switch-off
If the switched-on multimeter is not used for approx. 15 minutes, notice is
given of the pending automatic switch-off by the sounding of several signal
tones. After these, the display extinguishes and the multimeter switches itself
off. To switch the device back on, first of all place the function switch at the
position OFF and then at a measurement function.
FUNC.
r
You can also switch the device back on by pressing the button
.
- 83 -