Indicators On The Display; Saving Measured Values; Showing A Measurement Difference; Switching On The Display Illumination - Powerfix KH 3322 Instrucciones De Uso

Indicators on the Display

The measurement value in the display
figures.
A point appears, depending on the measured value, to show the decimal
place.

Saving measured values

• During the course of measurement, press the button
the measured value in the display
asurement.
z
In the display
• To quit the HOLD indicator, press the button

Showing a measurement difference

• During the course of measurement, press the button
z
In the display
• The last measured value is, as a reference value, reset to nil and in the
z
display appears the current measured value as a difference to the
measured value.
• If the current measured value corresponds with the reference value, in
z
the display
• To quit the REL indicator, press the button

Switching on the display illumination

• Press the button
z
the display
the symbol appears.
the indicator REL appears.
0.0 is shown.
LIGHT
4
to switch on the background illumination of
for approx. 5 seconds.
z
is shown to a maximum of four
z
so that it is available after the me-
HOLD
t
REL
5
- 93 -
HOLD
t
to retain
once again.
REL
5
.
once again.