Voltage Measurement - Powerfix KH 3322 Instrucciones De Uso

Voltage measurement

Warning!
NO MORE than 600 V ~ resp. 600 V
Should this limit be exceeded, there is a risk of both damaging the device
and an imperilment of the user.
Caution!
Disconnect the measurement prods from the object being tested before
selecting a different area of measurement. Otherwise, the device could
be damaged.
• Place the function switch
The indicator for direct voltage measurement
Press the button
either direct current or alternating current measurement
• Insert the measuring leads
VΩ
kets
• Connect the measurement prods with the object being tested.
The measured value is shown in the display
size and the measurement conclusion, in Millivolt (mV) or Volt (V).
q
at the position
FUNC.
r
to switch between
COM
7
and
may be fed in at the input sockets.
appears.
into the input sok-
8
.
z
, depending on the voltage
- 95 -
.
.