For Safe Operation - JUKI LBH-772NV-1 Manual De Instrucciones

1. To avoid electrical shock hazards, neither open the cover of the electrical box for the
motor nor touch the components mounted inside the electrical box.
1. To avoid personal injury, never operate the machine with any of the belt cover, eye guard,
finger guard or safety devices removed.
2. To prevent possible personal injuries caused by being caught in the machine, keep
your fingers, head and clothes away from the handwheel, V belt and the motor while the
machine is operation. In addition, place nothing around them.
3. To avoid personal injury, never put your hand under the cloth cutting knife, presser foot
lifter lever or needle when you turn "ON" the power switch or operate the machine.
4. To avoid personal injury, never put your fingers into the thread take-up cover while the
device is in operation.
5. To prevent possible accidents caused by abrupt start of the machine, make sure that the
stop-motion lever is in the stop-motion position before turning ON the power switch.
6. To avoid possible accidents because of abrupt start of the machine, turn OFF the power to
the machine and ascertain that the motor totally stops before removing the belt cover, the
motor cover and the V belt.
7. To avoid possible accidents, turn OFF the power to the machine and ascertain that the motor
totally stops before inspecting, cleaning or threading the machine or replacing the needle.
8. To avoid electrical shock hazards, never operate the sewing machine with the ground wire
for the power supply removed.
9. To prevent possible accidents because of electric shock or damaged electrical component(s),
turn OFF the power switch in prior to the connection/disconnection of the power plug.
10. In time of thunder and lighting, stop your work and disconnect the plug from the receptacle
for safety's sake so as to prevent possible accidents because of damaged electrical
component.
11. If the machine is suddenly moved from a cold place to a warm place, dew condensation
may be observed. In this case, turn ON the power to the machine after you have confirmed
that there is no danger of water drops in the machine so as to prevent possible accidents
arising from damaged electrical component(s).
12. Turn OFF the power to the sewing machine whenever you leave the sewing machine table.
13. Turn OFF the power to the machine in the case of power failure.
14. To prevent possible accidents caused by being caught in the machine, use the motor
provided with a motor pulley cover.
15. The hook rotates at a high speed while the machine is in operation. So as to avoid
possible injuries to hands, keep your hands away from the area near the hook. In addition,
turn OFF the power to the machine when replacing the bobbin.
16. To avoid possible personal injuries, be careful not to allow your fingers in the machine
when tilting/raising the machine head.
17. Be careful of handling this product so as not to pour water or oil, shock by dropping, and
the like since this product is a precision instrument.

FOR SAFE OPERATION

v