Assembling Multilock Welding Torches - Fronius MTG 250i Manual De Instrucciones

Assembling Mul-
tilock welding
torches
Risk from incorrect assembly of the welding torch.
This can result in damage to the welding torch.
► Before fitting a torch body, ensure that the interface between the torch body and the
► In the case of water-cooled welding torches, increased resistance may arise when
► Always tighten the union nut on the torch body as far as it will go.
1
1
2
2
*
38
NOTE!
hosepack is clean and undamaged.
tightening the union nut due to the construction of the welding torch.
(2) (1)
(2)
1
Ensure that the union nut is tightened as far as it will go.
The torch body is in the 0° position when
the dowel pin (1) on the hosepack engages
in the locating hole (2) in the torch body.
(1)
3
3
*